SCC100 communication controller is used to build the real-time communication between the terminal of distribution automation system and the main station. It can repost the data through communicating with the main station and each system. It can also collect data through communicating with remote terminal devices. It can be used as the middle layer, which is an important part of distribution automation system.
The information issued by the main station can be stored in the inside of communication controller; and the data can be recalled in any time. When voltage loss happened, more than 1000 records can be stored.
The software system adapts reliable and stable embedded real-time operation system, which can realize real-time multiple tasks cooperation.
As for the hardware, complete insolation can be realized on each interface/. When some errors occurred, the system can self-recover to be normal immediately.
It can support network and serial communication, which has 2 Ethernet interfaces, 10 serial interfaces and 2 RS485 communication interfaces.
The forward channel supports two ways, which are a serial port and network. Protocol DL/T634.5101 and DL/T634.5104 is used.
With indication function; there are relative indication function; on is remote signal input while off is remote signal break.
8 outputs are provided.
The output signal indication light is on the panel.
Locally maintenance can be realized through software；Put to pull out the function with the heat is supported
The hardware and software misoperation prevention function, which can ensure the reliability of the system.
Real-time control and setting value protection