This type of transformer is an excellent product for urban power network transformation, which is very suitable for urban power grid, high-rise buildings, business centers, theaters, hospitals, hotels, tunnels, subway, underground power stations, laboratories, stations, terminals, airports, Pad-mounted substation, explosion prevention and explosion proof in urban power network, high-rise buildings, business center, theaters, hospitals, hotels, tunnels, subways, underground power stations, laboratories, railway stations, docks, airports and Pad-mounted substations, etc, which need high level of retardant, anti-explosion, anti-moisture performances.

‍Model Explanation

Features

• Strong anti-short-circuit ability, low loss, low no-load current, strong impact resistance capability, low partial discharge, low noise, good heat sinking capacity.

• Performance parameters are better than GB and IEC standards.。

• Safe, flame retardant, fireproof, non-polluting, it can be installed directly in the load site.

• Maintenance-free, easy to install, low operating costs.

• High reliability, high mechanical strength.。

• Good seismic capability.

• Good anti-moisture & anti-corrosion features.

• Good overload capability, in the absence of air-cooling, it can withstand 120% of the load long-term service.

• Suitable to: substations located in densely populated, narrow urban places.

Normal service conditions 

Altitude: ≤1000m

Ambient air temperature: 

Maximum temperature: +40℃

Minimum temperature: -25℃ (Outdoor dry type power transformer)

Minimum temperature: -5℃ (Indoor dry type power transformer)

Highest average temperature of month: +30℃

Highest average temperature of year month: +20℃

Relative air humidity: ≤90%，There should not be water on the coil surface；

Three-phase power supply voltage of three-phase transformer should be approximately symmetrical 

Power supply voltage wave should be similar to sine wave.

10KV 

SC(B)10 Three Phase Epoxy Resin Cast Dry Type Power Transformer

Model	Rated Capacity (kVA)	Voltage (kV)		Vector Group	No-load Loss (W)	Load Loss (W)	Weight (kg)	Reference Dimensions (mm)L*W*H	Enclosure Dimensions (mm)L*W*H	Total Weight (kg)	Impedance Voltage High Voltage(%)
		High Voltage (%)H.V.	Low Voltage L.V.
SC10-30	30	6,6.3, 10, 10.5,11	0.4	Dyn11 Yyn0	190	710	250	680*450*640	1080*850*1020	400	4
SC10-50	50				270	1000	300	700*450*640	1100*850*1040	450
SC10-80	80				370	1380	430	860*450*760	1260*850*1150	600
SC10-100	100				400	1570	630	920*780*900	1500*1300*2200	830
SC10-125	125				470	1850	700	920*780*950	1500*1300*2200	900
SC10-160	160				540	2130	800	920*780*1000	1500*1300*2200	1000
SC10-200	200				620	2530	950	1100*780*960	1800*1300*2200	1150
SC10-250	250				720	2760	1100	1100*650*1150	1800*1300*2200	1300
SC10-315	315				880	3470	1300	1100*940*1150	1800*1300*2200	1500
SC(B)10-400	400				980	3990	1500	1100*940*1200	1800*1300*2200	1800
SC(B)10-500	500				1160	4880	2000	1350*940*1200	2000*1500*2200	2250
SC(B)10-630	630				1340	5880	2050	1350*940*1300	2300*1500*2200	2300
SC(B)10-630	630				1300	5960	2050	1400*940*1130	2300*1500*2200	2300	6
SC(B)10-800	800				1520	6960	2350	1450*940*1140	2300*1500*2200	2600
SC(B)10-1000	1000				1770	8130	2750	1500*940*1250	2300*1500*2200	3000
SC(B)10-1250	1250				2090	9690	3100	1500*940*1300	2300*1800*2200	3300
SC(B)10-1600	1600				2450	11730	3600	1550*940*1410	2300*1500*2200	4000
SC(B)10-2000	2000				3050	14450	4600	1650*1190*1780	2400*1600*2200	5000
SC(B)10-2500	2500				3600	17170	5500	1720*1190*1800	2500*1600*2200	6000

SC(B)11 Three Phase Epoxy Resin Cast Dry Type Power Transformer

Model	Rated Capacity (kVA)	Voltage (kV)		Vector Group	No-load Loss (W)	Load Loss (W)	Weight (kg)	Reference Dimensions (mm)L*W*H	Outside Dimensions (mm)L*W*H	Total Weight (kg)	Impedance Voltage High Voltag (%)
		High Voltage (%)H.V.	Low Voltage L.V.
SC11-30	30	6,6.3, 10, 10.5,11	0.4	Dyn11 Yyn0	168	710	250	680*450*640	1080*850*1020	400	4
SC11-50	50				238	1000	300	700*450*640	1100*850*1040	450
SC11-80	80				322	1380	430	860*450*760	1260*850*1150	600
SC11-100	100				350	1570	630	920*780*900	1500*1300*2200	830
SC11-125	125				413	1850	700	920*780*950	1500*1300*2200	900
SC11-160	160				476	2130	800	920*780*1000	1500*1300*2200	1000
SC11-200	200				546	2530	950	1100*780*960	1800*1300*2200	1150
SC11-250	250				630	2760	1100	1100*650*1150	1800*1300*2200	1300
SC11-315	315				770	3470	1300	1100*940*1150	1800*1300*2200	1500
SC(B)11-400	400				854	3990	1500	1100*940*1200	1800*1300*2200	1800
SC(B)11-500	500				1015	4880	2000	1350*940*1200	2000*1500*2200	2250
SC(B)11-630	630				1176	5880	2050	1350*940*1300	2300*1500*2200	2300
SC(B)11-630	630				1134	5960	2050	1400*940*1130	2300*1500*2200	2300	6
SC(B)11-800	800				1330	6960	2350	1450*940*1140	2300*1500*2200	2600
SC(B)11-1000	1000				1547	8130	2750	1500*940*1250	2300*1500*2200	3000
SC(B)11-1250	1250				1827	9690	3100	1500*940*1300	2300*1800*2200	3300
SC(B)11-1600	1600				2142	11730	3600	1550*940*1410	2300*1500*2200	4000
SC(B)11-2000	2000				2905	14450	4600	1650*1190*1780	2400*1600*2200	5000
SC(B)11-2500	2500				3500	17170	5500	1720*1190*1800	2500*1600*2200	6000